Panel Tools

ƒ?› Suitable for pre-forming and finishing door skins onto door frames. ƒ?› Also suitable for joining sheet material. ƒ?› Fitted with Nylon pad to prevent panel deformation. ƒ?› Model No. RE92/33

• Strong suction will pull out panel dents, move glass panels and aid handling. • Suction releases simply by lifting the edge. • Model No. AK98

ƒ?› Chrome Vanadium steel flat splitting tool suitable for the manual cutting of spot welds. ƒ?› Model No. AK570

ƒ?› Specialist device for pulling dents from panels and bodywork. ƒ?› Contoured aluminium handle and suction release trigger give the technician close control. ƒ?› Maximum Pull Capacity: 20kg. ƒ?› Model No. AK102

ƒ?› All steel construction with spring loaded handles. ƒ?› ??5mm Holes are suitable for preparing panels for MIG/spot welding. ƒ?› Fitted with non-slip PVC grips. ƒ?› Model No. RE92/35

ƒ?› Save valuable time preparing panel edges. ƒ?› All steel construction with spring loaded handles. ƒ?› Turn the head and you have a strong hole punch-6mm holes for spot welding or brazing. ƒ?› Fitted with non-slip PVC grips. ƒ?› Model No. RE92/31

ƒ?› Save valuable time preparing panel edges. ƒ?› All steel construction with spring loaded handles. ƒ?› Precision made jaws make 10mm flange on 18-20 gauge mild steel or aluminium sheet and provide smooth, flush joint between panels. ƒ?› Fitted with...

ƒ?› A comprehensive set of starter tools for the professional bodyshop technician. ƒ?› Heavyweight, heat treated, high quality steel components are carefully shaped and finished to allow the technician (with practice) to coax out all manner of dents and...

ƒ?› Air activated suction pad keeps firm hold of panel while slide hammer is used to ease out dents and depressions without damage to the paint surface. ƒ?› Ideal for initial panel reshaping. ƒ?› Supplied with ??75, 100 and 125mm suction pads and hook...

ƒ?› Pack of 50 wavy-wire. ƒ?› Suitable for panel pulling systems. ƒ?› Model No. RE100/WS

ƒ?› Versatile suction dent puller fitted with integral vacuum generator/indicator. ƒ?› Retains a firm hold of the panel while the slide hammer is used to ease out dents and depressions - without damage to the painted finish. ƒ?› Ideal for initial panel...

ƒ?› Slide hammer kit with 2.1kg sliding weight. ƒ?› Comfortable rubber grip handle for added control. ƒ?› Supplied with various attachments to perform a range of tasks. ƒ?› Model No. DP945

ƒ?› Heavy-duty slide hammer with 4.4kg sliding weight. ƒ?› For use on body panels and vehicle chassis. ƒ?› Supplied with various attachments in tough storage carry-case. ƒ?› Model No. DP90

ƒ?› Slide hammer kit with 2.04kg sliding weight. ƒ?› Comfortable rubber grip handle for added control. ƒ?› Attachments include: Small & Large Flat Hooks, Small & Large Round Hooks, Screw Holder, Adaptor, Self Tapping Screw, Taper Screw. ƒ?› Supplied in...

ƒ?› Polished, drop-forged steel dollies. ƒ?› Hammers with fibreglass handle and rubber grips. ƒ?› Supplied in storage case. ƒ?› Model No. CB707

ƒ?› Drop-forged steel dollies and spoons. ƒ?› Professional hickory handled hammers. ƒ?› Contents: Hammers; Bumping, Skinning, Pein/Finish, Pick/Finish, Dollies; Toe, Universal, Heel, Spoons; Dinging, Surfacing. ƒ?› Supplied in carry-case. ƒ?› Model No...

ƒ?› Polished, drop-forged steel dollies. ƒ?› Professional hickory handled hammers. ƒ?› Supplied in carry-case. ƒ?› Model No. CB507

ƒ?› Assortment of bodyshop tooling, designed for levering, separating and reforming of panels. ƒ?› Maximum Bar Length: 900mm. ƒ?› Supplied in carry-case. ƒ?› Model No. CB50

• Heavy-duty drop-forged and heat treated steel punch body with compound lever action. • Suitable for precision punching of holes in steel, aluminium, brass, copper and plastic. • Fitted with gauge for depth adjustment up to 50mm. •...

• Drop-forged, Chrome Molybdenum steel blades with serrated jaws. • Induction hardened to 60-62 HRC for high strength. • Light and compact for controllable cutting. • Cuts up to 1.2mm cold rolled steel or 0.7mm stainless steel. •...

• Drop-forged, Chrome Molybdenum steel blades with serrated jaws. • Induction hardened to 60-62 HRC for high strength. • Light and compact for controllable cutting. • Cuts up to 1.2mm cold rolled steel or 0.7mm stainless steel. •...

• Drop-forged, Chrome Molybdenum steel blades with serrated jaws. • Induction hardened to 60-62 HRC for high strength. • Light and compact for controllable cutting. • Cuts up to 1.2mm cold rolled steel or 0.7mm stainless steel. •...

• Offset head for easier cutting. • Drop-forged Chrome Molybdenum steel blades for greater strength and durability. • Electrodeposition finish to prevent the onset of rust and composite handles for added comfort. • Cuts up to 1mm cold...

• One-piece, drop-forged handles with induction hardened blades to 55-60 HRC. • Cushion grip handle. • Cuts up to 0.8mm cold rolled steel or 0.45mm stainless steel. • Model No. AK6911

• One-piece, drop-forged blades with spring loaded handles. • Suitable for cutting narrow gauge ferrous and non-ferrous metal sheet. • Capacity: 0.8mm, Overall Length: 250mm. • Model No. AK6910

• Drop-forged, Chrome Vanadium, tempered steel blades with serrated jaws. • Self opening, spring action handles with composite, contoured, colour-coded grips with safety catch. • Left, Right and Straight Cut Shears. • Model No. AK6907

• Drop-forged, Chrome Vanadium, tempered steel blades with serrated jaws. • Self opening, spring action handles with composite, contoured, colour-coded grips and safety catch. • Model No. AK69/S

• An effective method for creating an evenly spaced butt weld joint. • Built-in level adjustment of 0-3mm either side allows different thickness materials to be accurately aligned. • Model No. AK6805

• Small and compact with exceptional clamping force. • Ideal for automotive applications when positioning body panels prior to welding. • Micro clamp enables areas to be secured where other tools struggle to fit, such as door columns and...

ƒ?› Ideal for separating spot-welded panels during repairs. ƒ?› Chrome Molybdenum hammer-thru shafts. ƒ?› Soft grip handles for comfort and control. ƒ?› Contents: Straight, 30?ø Offset, 90?ø Angle. ƒ?› Model No. AK579

ƒ?› Model No. AK327/B

ƒ?› Quickly cuts through sheet metal and will handle up to 18 gauge sheet. ƒ?› Excellent for bodyshop and steel fabricator use. ƒ?› Fitted with comfortable, insulated handles. ƒ?› Model No. AK327

ƒ?› Specialist device for pulling dents from panels and bodywork. ƒ?› Contoured aluminium handle and suction release trigger give the technician close control. ƒ?› Maximum Pull Capacity: 15kg. ƒ?› Model No. AK101

ƒ?› Specialist device for pulling dents from panels and bodywork. ƒ?› Contoured aluminium handle and suction release trigger give the technician close control. ƒ?› Maximum Pull Capacity: 10kg. ƒ?› Model No. AK100