General Workshop Tools

• Set of four angled tools that allow removal of O-rings and seals without damage. • Features contoured and spoon tips. • Lengths: 130, 200mm. • Model No. VS5211

ƒ?› Scraper with soft grip handle and hanging hole. ƒ?› Suitable for removing adhesive or paint from glass or metal surfaces. ƒ?› Pack of five replacement razor blades - Model No. AK867/1. ƒ?› Model No. AK52504

• Chrome Vanadium steel extra-long shafts with comfort grip handle. • Suitable for various vehicle applications, including removal of hose clips, hoses, O-rings and seals. • Model No. VS5210

• Long handled razor scraper. • Suitable for scraping gaskets and also for removing labels, stickers and overspray from car windows. • Safe storage of spare blades in handle. • Supplied with three razor and three plastic blades...

• Useful 2pc set with chrome finish shafts and comfort grip handles. • Ideal for the removal of coolant hoses, O-rings and seals. • Model No. VS352

ƒ?› Used in conjunction with a standard air hammer at low pressure and 5/16ƒ?(8mm) Hex bit. ƒ?› Vibration shakes the screw loose doing the hard work for you, while rotation is applied with the handle. ƒ?› Ideal for corroded, countersunk, overtightened...

ƒ?› Three tier telescopic aluminium tailgate/bonnet support with tough rubber pads at each end. ƒ?› Lock in any position with a simple twist. ƒ?› Also used for holding open doors, depressing clutch, brake or accelerator pedals. ƒ?› Model No. VS0140

ƒ?› Wind speed measuring device featuring live/max/average/wind chill and Beaufort scale. ƒ?› Ideal for checking workshop dust/fume extraction devices. ƒ?› Also reads temperature which can be measured in either ?øC or ?øF. ƒ?› Readings are displayed on a...

ƒ?› High precision portable light meter with silicon photodiode and filter. ƒ?› Large back-lit LCD screen that displays in either Lux or Fc. ƒ?› Range: 0-99999 Lux / 0-9999 Fc. ƒ?› Accuracy: ?ñ6%. ƒ?› Ideal for general use or ensuring sufficient lighting...

ƒ?› Chrome Vanadium steel, heat treated for added strength and chrome plated to resist corrosion. ƒ?› Reversible legs. ƒ?› Swivel thrust plate prevents damage to shaft ends. ƒ?› Model No. SGP38

ƒ?› Chrome Vanadium steel, heat treated for added strength and chrome plated to resist corrosion. ƒ?› Reversible legs. ƒ?› Swivel thrust plate prevents damage to shaft ends. ƒ?› Model No. SGP36

ƒ?› Chrome Vanadium steel, heat treated for added strength and chrome plated to resist corrosion. ƒ?› Reversible legs. ƒ?› Swivel thrust plate prevents damage to shaft ends. ƒ?› Model No. SGP34

ƒ?› Chrome Vanadium steel, heat treated for added strength and chrome plated to resist corrosion. ƒ?› Reversible legs. ƒ?› Model No. SGP33

ƒ?› Compact set containing bearing separator, yoke and extensions. ƒ?› Chrome Vanadium components ensure long life. ƒ?› Also suitable for removing small gears, wheels and fittings from shafts. ƒ?› Supplied in storage case. ƒ?› Model No. PS996

ƒ?› Designed for the fast and safe removal of small bearings. ƒ?› Screw press, operated by tommy-bar or by 14mm drive, exerts up to 1tonne of pressure. ƒ?› Spring loaded and drop-forged legs are secured around the bearing or gear by a screw collar to...

ƒ?› Puller yoke with 10tonne hydraulic ram. ƒ?› Suitable for four and five stud hubs. ƒ?› Hydraulic ram provides additional power to extract the most stubborn hubs. ƒ?› Model No. PS993

ƒ?› Drop-forged Chrome Vanadium steel puller arms with locking/gripping feature. ƒ?› Set includes three sets of 100mm triple leg pullers with locking features which clamp the jaws firmly inside/outside the gear or bearing. ƒ?› Includes 1.2kg slide hammer...

ƒ?› Hydraulic ram piston fits all Sealey hydraulic puller sets and is also suitable for use with other popular makes of hydraulic gear pullers. ƒ?› Screw mechanism converts power to 10 tonne ram head with enough force to remove most stubborn bearings,...

ƒ?› Forged steel jaws. ƒ?› Suitable for removing bearings, gears and bushes from shafts. ƒ?› Model No. PS989

ƒ?› Forged steel jaws. ƒ?› Suitable for removing bearings, gears and bushes from shafts. ƒ?› Model No. PS988

ƒ?› Forged steel jaws. ƒ?› Suitable for removing bearings, gears and bushes from shafts. ƒ?› Model No. PS987

ƒ?› Forged steel jaws. ƒ?› Suitable for removing bearings, gears and bushes from shafts. ƒ?› Model No. PS986

ƒ?› Cast puller yoke with forged separator. ƒ?› 10tonne Hydraulic ram interchangeable with other units in the series. ƒ?› Suitable for pulling commercial vehicle size bearings from ??120-150mm. ƒ?› Maximum Depth: 420mm. ƒ?› Contents: Separator...

ƒ?› Mechanical puller set with ??30-50mm and ??50-75mm separators and single yoke with 180mm thrust bolt. ƒ?› Suitable for engineering, automotive, marine and agricultural applications. ƒ?› Supplied in carry-case. ƒ?› Model No. PS984

ƒ?› 2.3kg Slide hammer with 580mm shaft. ƒ?› Use eight ways: external 3 Leg Puller, internal 3 Leg Puller, external 2 Leg Puller, internal 2 Leg Puller, Grip Wrench adaptor, Lip Puller, Hub Puller, Dent Puller. ƒ?› Supplied in carry-case. ƒ?› Model No...

ƒ?› Forged steel three-way bearing separator and gear puller set. ƒ?› Operated with supplied 10tonne hydraulic ram or manual force screw. ƒ?› Puller Leg Reach (Size/Spread): 160 (190)mm. ƒ?› Separator Capacity: 30-84mm. ƒ?› Manual Thrust Screw Length:...

ƒ?› Master set of gear pullers and bearing separators. ƒ?› Forged steel bearing separator. ƒ?› 10tonne Ram with enough force to remove most stubborn bearings, pulleys and shafts. ƒ?› Supplied in carry-case. ƒ?› Contents: 10tonne Hydraulic Ram, 100mm Leg...

ƒ?› Forged steel 2-way yoke allows twin or triple leg pulls. ƒ?› 10tonne Hydraulic power unit with tommy bar. ƒ?› Suitable for pulling hubs, flanges, gears and bearings. ƒ?› Supplied with 3 x 3 position puller arms and 3 sets of extension plates. ƒ?›...

ƒ?› Cast puller yoke with forged separator. ƒ?› 10tonne Hydraulic ram interchangeable with other units in the series. ƒ?› Supplied with ??75-105mm bearing separator. ƒ?› Maximum Puller Depth: 420mm. ƒ?› Packed in steel case. ƒ?› Model No. PS980

ƒ?› Multipurpose puller set for extracting flywheels and pulleys. ƒ?› Minimum/Maximum Size/Spread: 40/93mm. ƒ?› Supplied in storage case. ƒ?› Model No. PS979

ƒ?› Steering wheel yoke manufactured from drop-forged carbon steel. ƒ?› Suitable also as two or three-way puller for removal of pulleys and flywheels from small engines. ƒ?› The larger ductile steel yoke is suitable for pulling harmonic balancers, timing...

ƒ?› Designed to detach the steering drop arm from steering box found on Land Rovers. ƒ?› Applications: Defender 90, 110, 130. ƒ?› Model No. PS970

ƒ?› Designed to detach the steering drop arm from the steering box found on Land Rovers. ƒ?› Applications: Land Rover Series 2, 2A, 3. ƒ?› Model No. PS969

ƒ?› Twin/triple leg puller set with reversible legs allowing internal and external pulling operations. ƒ?› Manufactured from carbon steel with a drop-forged heat treated construction for strength and durability. ƒ?› Supplied with two and three leg yokes...

ƒ?› Heavy-duty triple leg 5tonne hydraulic puller. ƒ?› Suitable for pulling hubs, flanges, gears and bearings. ƒ?› Supplied with three 2-position puller legs and carry-case. ƒ?› Model No. HP5

ƒ?› Heavy-duty triple leg 10tonne hydraulic puller. ƒ?› Suitable for pulling hubs, flanges, gears and bearings. ƒ?› Supplied with three 2-position puller legs and carry-case. ƒ?› Model No. HP10

ƒ?› Fully adjustable height indicator for commercial vehicle cabs. ƒ?› Height Range: 8-20ft. ƒ?› Model No. CV032

• For the removal of blind bearings where traditional pullers will not reach. • Ball-end tips fit inside bearing races to provide traction for extraction. • Chrome Vanadium steel components. • Suitable for 6004-6010, 6201-6206,...

• Chrome plated steel. • Retracting blade carrier for extra safety. • Supplied with five spare blades. • Model No. AK867

• Blades for Model No. AK8651.V2. • Pack of 5. • Model No. AK8651.V2/B

• Drop-forged, Chrome Vanadium steel reversible legs. • Swivel thrust plates on larger sizes prevent damage to shaft ends. • Hex head forcing screws suitable for use with a ratchet or spanner. • Size/Spread: 75, 100, 150, 200mm...

• Drop-forged, Chrome Vanadium steel reversible legs. • Swivel thrust plates on larger sizes prevent damage to shaft ends. • Hex head forcing screws suitable for use with a ratchet or spanner. • Size/Spread: 75, 100, 150mm. •...

• Medium stroke 1.5kg slide hammer with 395mm shaft and a screw type bridge extractor. • Gently removes blind bearings where the use of a slide hammer may damage the surrounding material. • Bearing extractor collets with internal capacity...

• Fully chromed carbon steel medium stroke slide hammer. • 380mm Overall length with 0.9kg hammer. • Bearing extractor collets with internal capacity from 12 to 32mm. • Supplied in carry-case. • Model No. AK714

ƒ?› Replaceable razor type blade scraper, soft grip handle with blade storage compartment in base. ƒ?› Extendable shaft with four 25mm increments. ƒ?› Supplied with four types of blade, thin, thick, angled and composite. ƒ?› Suitable for removing...

ƒ?› 1.8mm Ultra stiff, hardened stainless steel scraper blades suitable for numerous workshop and bodyshop applications including gasket scraping and windscreen preparation. ƒ?› Soft grip handle design gives maximum control. ƒ?› Model No. AK523

ƒ?› Double end tool suitable for use with all types of O-ring and grease seal. ƒ?› Knurled barrel gives extra grip to greasy hands. ƒ?› Model No. AK522

ƒ?› Six long reach picks with black finished steel shafts. ƒ?› Contents: Straight, Right Angle, Half-Round, Swan Neck, 45?ø/ 90?ø Tip, 40?ø/45?ø Tip. ƒ?› Suitable for pin/clip picking and the removal of O-rings and seals. ƒ?› Model No. AK5215

ƒ?› Chrome finish shafts with knurling for fingertip precision. ƒ?› Ergonomically styled handles for comfort, grip and accuracy. ƒ?› Suitable for removal of bushings, cotter pins, O-rings and seals. ƒ?› Contents: Straight, Right Angle, Half-round, Swan...

ƒ?› Chrome finish shafts with knurling for fingertip precision. ƒ?› Suitable for removal of bushings, cotter-pins, O-rings and seals. ƒ?› Classic style handle. ƒ?› Overall Length: 125mm. ƒ?› Model No. AK521