Power Saws

ƒ?› Three speed settings. ƒ?› Heavy-duty cast base and cutting arm. ƒ?› Oil bath gear box and life lubricated bearings for quiet, smooth operation. ƒ?› Full guarded blade and magnetic no-load voltage switch. ƒ?› Complies with CE directive. ƒ?› Stand is...

ƒ?› Fully CE approved. ƒ?› Heavy-duty power bandsaw with hydraulic cutting arm control for a smooth cut. ƒ?› 300mm Capacity at 90?ø and 170mm at 45?ø. ƒ?› 550W/230V Motor. ƒ?› Fully guarded and fitted with pulley cover safety switch. ƒ?› Saw arm fitted...

ƒ?› Fully approved to CE directives this 315mm contractor's saw is full of features and ideal for the serious enthusiast and professional workshop. ƒ?› Fitted with no-volt release safety switch, extension table and dust extraction. ƒ?› Full blade tilt up...

ƒ?› Table saw blade for Model No. TS10P. ƒ?› Diameter: 254mm. ƒ?› Teeth: 40. ƒ?› Bore: 16mm. ƒ?› Model No. TS10P.60

ƒ?› Powder coated aluminium table with one rear and two side extension tables. ƒ?› Supplied with 40 tooth TCT blade and 1500W motor with electric brake feature. ƒ?› Adjustable blade height and tilt, up to 45?ø. ƒ?› Fitted with circuit breaker reset...

ƒ?› Powerful 1800W motor. ƒ?› Features integral aluminium workpiece supports which store inside the aluminium base to save space and prevent loss. ƒ?› Fitted with a 60-tooth TCT blade for fresh wood. ƒ?› Can be fitted with Model No. SMS255B multipurpose...

ƒ?› Powerful 1800W motor. ƒ?› Features integral aluminium workpiece supports which store inside the aluminium base to save space and prevent loss. ƒ?› Fitted with a 36-tooth TCT blade for fresh wood. ƒ?› Can be fitted with Model No. SMS216B multipurpose...

ƒ?› Lightweight portable saw with aluminium base, chassis and machined aluminium table. ƒ?› Features sliding action, table extension wings and work clamp. ƒ?› Laser guide enables user to accurately align and cut. ƒ?› Trigger control with safety catch...

ƒ?› Cut-off stand with solid cast-iron base for precise vertical cutting using an angle grinder. ƒ?› Supplied with vice which mounts onto the base to secure the workpiece. ƒ?› Suitable for cuts of up to 18mm. ƒ?› Can be used with all Sealey 100mm, 115mm...

ƒ?› Swivel cutting arm saves space when cutting angled work - ideal for the smaller workshop or engineer's shop which is short on space. ƒ?› Professional type quick-grip vice included as standard - put the work on the vice, push the jaw up to the...

ƒ?› General purpose cut-off saw suitable for semi-professional use. ƒ?› Lightweight and easily transported with integral carry handle. ƒ?› Fitted with ??355mm abrasive disc suitable for metal cutting. ƒ?› Powered by 2480W motor. ƒ?› Maximum Cutting...

ƒ?› General purpose abrasive saw suitable for site use. ƒ?› Supplied with abrasive disc suitable for metal-cutting. ƒ?› Trigger operated 2480W motor and hardened gears give smooth transmission of power. ƒ?› Fitted with mitre vice. ƒ?› Maximum Cutting...

ƒ?› Fully CE approved. ƒ?› Heavy-duty power bandsaw with hydraulic cutting arm control for a smooth cut. ƒ?› Maximum Capacity: 90mm at 60?ø, 150mm at 45?ø and 255mm at 0?ø. ƒ?› 1100W/230V Motor. ƒ?› Saw arm fitted with hydraulic damping to prevent the...

ƒ?› ??355mm TCT blade cuts slow and cold without the need for coolant fluid. ƒ?› Will handle steel, wood, brass, aluminium and most plastics, without the need to change blades. ƒ?› Even hidden nails and screws in timber are no longer a problem. ƒ?›...

ƒ?› ??355mm TCT blade cuts slow and cold without the need for coolant fluid. ƒ?› Will handle steel, wood, brass, aluminium and most plastics, without the need to change blades. ƒ?› Even hidden nails and screws in timber are no longer a problem. ƒ?›...

ƒ?› Fully CE approved. ƒ?› Heavy-duty power bandsaw with hydraulic cutting arm control for a smooth cut. ƒ?› Maximum Capacity: 70mm at 60?ø, 120mm at 45?ø and 210mm at 0?ø. ƒ?› 900W/230V Motor. ƒ?› Saw arm fitted with hydraulic damping to prevent the arm...

ƒ?› Large cutting capacity. ƒ?› Ideal for Industrial and Agricultural engineering applications. ƒ?› Precision machined cast-iron saw bed. ƒ?› Hydraulic feed saw arm gives greater cutting control allowing clean results. ƒ?› 24V system for coolant pump and...

ƒ?› ??180mm TCT blade cuts slow and cold without the need for coolant fluid. ƒ?› Will handle steel, wood, brass, aluminium and most plastics, without the need to change blades. ƒ?› Even hidden nails and screws in timber are no longer a problem. ƒ?›...

ƒ?› General purpose cut off saw suitable for semi-professional use or for the home enthusiast. ƒ?› Lightweight and easily transported with integral carry handle. ƒ?› Fitted with ??150mm abrasive disc suitable for metal cutting. ƒ?› Powered by a 610W...

ƒ?› Throat Depth: 335mm. ƒ?› Maximum Cutting Height: 165mm. ƒ?› Fully approved to current CE directives. ƒ?› Steel chassis with locking blade wheel covers. ƒ?› Micro switches prevent operation when either blade wheel cover is open. ƒ?› Bearing mounted...

ƒ?› Throat Depth: 305mm. ƒ?› Maximum Cutting Height: 165mm. ƒ?› Fully approved to current CE directives. ƒ?› Steel chassis with locking wheel covers. ƒ?› Micro switches prevent operation when either blade wheel cover is open. ƒ?› Bearing mounted blade...

ƒ?› Throat Depth: 245mm. ƒ?› Max. Cutting Height: 100mm. ƒ?› Dust Extraction Diameter: ??40mm. ƒ?› Steel chassis with locking blade wheel covers. ƒ?› Fitted with blade wheel brush to prevent dust accumulation. ƒ?› Bearing mounted blade wheels and belt...

ƒ?› Throat Depth: 200mm. ƒ?› Max. Cutting Height: 80mm. ƒ?› Dust Extraction Diameter: ??40mm. ƒ?› Fully approved to current CE directives. ƒ?› Steel chassis with locking blade wheel covers. ƒ?› Fitted with blade wheel brush to prevent dust accumulation...

ƒ?› Quality cast rounded table, suitable for precise and intricate cuts. ƒ?› Features parallel arm design and quick blade changing system. ƒ?› Variable speed operation to cut multiple types of material. ƒ?› Fitted with adjustable safety guard. ƒ?›...