Motorcycle & Bicycle Tools

Sealey Vacuum Oil & Fluid Extractor Manual 1.6ltr (MS155) Product Description 1.6ltr Capacity. Ideal for other liquids such as water. To remove oil from an engine, simply push the probe down the dip-stick tube and pump the handle on the top of the...

ƒ?› Specially designed spoke wrench with eight interchangeable sized heads. ƒ?› Suitable for adjusting spoke tension and correcting buckled wheels. ƒ?› Sizes: 5.4, 5.6, 5.8, 6, 6.2, 6.4, 6.6, 6.8mm. ƒ?› Model No. MS086

Faithfull Tyre Lever Chrome Plated 24 x 1in (FAIAUTL24) Product Description This Faithfull Straight Pattern Tyre Lever is manufactured from hardened and tempered carbon steel for strength and reliability, and has a corrosion-resistant chrome plating...

Faithfull Tyre Depth Gauge Digital Readout 0-25mm (FAIAUDEPTH) Product Description This Faithfull Tyre Depth Gauge has a large, clear LCD display, making it easy to read. It allows zero setting at any position and has metric/imperial interchange. The...

• Safe and easy way to install lower steering bearing. • Includes three aluminium dies and driver bar, to be used in conjunction with a soft head hammer. • Model No. VS1831

Sealey Gudgeon Pin Remover - Motorcycle (VS1830) Product Description Features interchangeable piston adaptors. One for full skirt pistons that makes 360° contact with the cylinder. Short skirt piston adaptor designed for use with slipper pistons...

• Essential for the assembly and disassembly of suspension units. • Suitable for most types of classic and modern motorcycle coil springs. • Supplied with four spare plastic spring protectors in metal storage case. • Use with ratchet...

Sealey Motorcycle Flywheel Puller Set 10pc (VS1822) Product Description Comprehensive set of flywheel pullers used to separate flywheel from the crankshaft taper. Features ten pullers of which five have double ends, giving increased applications...

ƒ?› A must for installing tyres on spoked wheels. ƒ?› Hook slots around spoke and pushes bead down on opposite side of the tool. ƒ?› The bead is held into position while fitting the tyre with tyre levers. ƒ?› No more struggling to keep the bead down. ƒ?›...

ƒ?› Professional motorcycle wheel balancer. ƒ?› Suitable for most motorcycle wheels. ƒ?› Includes two cones and spindle for precise, easy alignment and balancing. ƒ?› Uses gravity to find the heavy point of a wheel and tyre. ƒ?› Maximum Cone Size: ??35mm...

ƒ?› Quality drop-forged and tempered alloy steel with flat rounded tip. ƒ?› Moulded handle enables extra grip. ƒ?› Suitable for use with motorcycle, small agricultural or leisure tyres. ƒ?› Model No. VS1818

ƒ?› Aluminium kit suitable for straight installation of bearings to headstock. ƒ?› Includes seven dies for bearing sizes ranging from 32 to 46mm. ƒ?› Bearing setting bar features seven increments. ƒ?› Comfort grip T-handle rotates separately from the...

Sealey Motorcycle Valve Spring Compressor (VS1814) Product Description Suitable for most motorcycle engines. Features two sizes of threaded adjusters for increased applications and five sizes of interchangeable jaws.  Supplied in carry-case.  ...

Sealey Motorcycle Pulley Holder - Large Ø30-160mm (VS1813) Product Description Suitable for flywheel and clutch pulleys on a large range of motorcycles. Adjustable strap for use on different pulley sizes up to Ø160mm. Rotate handle so foot...

Sealey Universal Motorcycle Pulley Holder (VS1812) Product Description Pulley holder suitable for flywheel and clutch pulleys on a large range of motorcycles. Adjusting screw allows tool to be locked at the required size. PVC dipped handle gives added...

Sealey Motorcycle Pulley Holder Ø45-120mm (VS1811) Product Description Suitable for flywheel and clutch pulleys on a large range of motorcycles. Adjustable strap for use on different pulley sizes. Rotate handle so foot contacts against pulley to...

ƒ?› Prevents spindle from spinning when tightening or loosening wheel nut. ƒ?› Features 1/2"Sq drive adaptor and four hex bits for different sizes of spindle. ƒ?› Spindle Sizes: 17, 19, 22, 24mm. ƒ?› Supplied in storage case. ƒ?› Model No. VS1808

ƒ?› Moulded protectors with connecting cord. ƒ?› Designed to reduce the risk of damage to motorcycle wheel rims when removing or fitting tyres with tyre levers. ƒ?› Model No. VS1807

Sealey Motorcycle Brake Piston Removal Pliers (VS1806)  Product Description Extract brake caliper pistons without risk of damage. Serrated pressure blocks for non-slip operation. Clamp screw allows pliers to be fixed into cup of piston for added...

ƒ?› Manual bead breaker, especially suitable for motorcycle tyres. ƒ?› Lever action with parallel linkage keeps head at the optimum angle for breaking the bead. ƒ?› Model No. TC968

ƒ?› Manual type tyre changer suitable for a wide variety of tyres and wheels including those fitted to motorcycles, quad bikes, go-karts and golf buggies. ƒ?› Works on bearing or hub centred wheels and supplied with two centre posts. ƒ?› Min./Max. Wheel...

Sealey Motorcycle Height Adjustable Front/Rear Combination Stand (RPS5) Product Description Lifts and stabilises the front or rear of any two-sided swing armed bike quickly and easily. Supplied with width and angle adjustable rubber support pads and...

Sealey Locating Pin for RPS3S Ø40.5mm (RPS3S4) Product Description Ø40.5mm Locating pin for Model No. RPS3S single sided rear support stand. Technical Specifications Nett Weight: 0.38Kg Size: Ø40.5mm

Sealey Locating Pin for RPS3S Ø28.5mm (RPS3S3) Product Description Ø28.5mm Locating pin for Model No. RPS3S single sided rear support stand. Technical Specifications Nett Weight: 0.23Kg Size: Ø28.5mm

Sealey Locating Pin for RPS3S Ø27.5mm (RPS3S2) Product Description Ø27.5mm Locating pin for Model No. RPS3S single sided rear support stand.  Technical Specifications Nett Weight: 0.22Kg Size: Ø27.5mm

Sealey Locating Pin for RPS3S Ø25.5mm (RPS3S1) Technical Specifications Ø25.5mm Locating pin for Model No. RPS3S single sided rear support stand. Technical Specifications Nett Weight: 0.21Kg Size: Ø25.5mm

Sealey Single Sided Rear Support Stand - Without Pin (RPS3S) Product Description Suitable for motorcycles with single rear swing arm which cannot be supported both sides. Heavy-duty construction. Supplied without locating pins, these need to be...

Sealey Universal Rear Wheel Stand with Rubber Supports (RPS2) Product Description Lifts and stabilises any dual swing arm motorbike quickly and easily.  Fitted with width and angle adjustable rubber support pads.  Technical Specifications ...

Sealey Bobbin Supports for RPS2 (RPS1BS) Product Description Optional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion...

Sealey Motorcycle Tank Cover (MTC1) Product Description Water/oil resistant motorcycle tank cover. Double layer cover for extra protection. Inner layer is made from soft non-slip material. Features anti-scratch material to protect tank paintwork. ...

Sealey Mini Tractor/Quad/Motorcycle Lift 680kg Capacity Air/Hydraulic (MT680) Product Description Min./Max. Height: 190/790mm. Width (Standard/Maximum): 710/1220mm. Length: 2000mm. All steel construction with heavy-duty hydraulic ram with air pump...

Sealey Motorcycle Disc Brake Piston Spreader Tool (MS711) Product Description Essential tool for retracting the brake piston to allow insertion of new brake pads. Suitable for most front and rear motorcycle brake calipers. Maximum Spread: 50mm.  ...

ƒ?› Quality Chrome Vanadium steel tyre lever with hard plastic moulding hook and taper ends. ƒ?› Designed to reduce the risk of damage to motorcycle wheel rims when removing or fitting tyres. ƒ?› Dimensions (L x W x D): 500 x 28 x 15mm. ƒ?› Model No...

ƒ?› Quality Chrome Vanadium steel tyre lever with hard plastic moulding hook and taper ends. ƒ?› Designed to reduce the risk of damage to motorcycle wheel rims when removing or fitting tyres. ƒ?› Dimensions (L x W x D): 380 x 25 x 12mm. ƒ?› Model No...

ƒ?› Designed to relieve fork spring tension allowing removal of the tube caps from the rod, without damaging the threads. ƒ?› Can be used with the fork in situ or on the bench. ƒ?› Fits most modern road motorcycles. ƒ?› Use with 17mm socket. ƒ?› Maximum...

Sealey Oil & Fluid Inspection Syringe 70ml (MS166) Product Description Multipurpose syringe with synthetic rubber seal, ideal for the transfer of oils/fluids to and from vehicle components. Compact size and flexible extension tube makes it ideal for...

Sealey Spark Plug Box Spanner Set 3pc Long Reach Double End (MS165) Product Description Double end, traditional style, long reach spark plug box spanners with L-bar. Length: 150mm. • Supplied in a pouch for safe storage.  Technical...

Sealey Motorcycle Toolkit Underseat 28pc (MS164) Product Description Small compact kit comprises a selection of essential motorcycle maintenance tools. Supplied in small carry-case, ideal for storage under a motorcycle seat. Tools feature soft grip...

ƒ?› Air Delivery: 12.5ltr/min. ƒ?› Pressure gauge reads up to 5.5bar(80psi). ƒ?› 100mm Air hose and 2.8m power cord. ƒ?› Features a work light and integral storage for air output hose. ƒ?› 12V motor suitable for inflating tyres on motorcycles and cars...

Sealey Motorcycle Brake Piston Removal Kit 14pc (MS162) Product Description Designed to reduce the time taken when removing piston from motorcycle brake calipers. Extract brake caliper pistons without risk of damage to outer face of piston. Includes 12...

Sealey Double End Long Reach Spark Plug Box Spanner 18/21mm with L-Bar (MS161) Product Description 18/21mm Double end, traditional style, long reach spark plug box spanner with L-bar. Supplied in a pouch for safe storage Technical Specifications ...

Sealey Double End Long Reach Spark Plug Box Spanner 14/16mm with L-Bar (MS160) Product Description 14/16mm Double end, traditional style, long reach spark plug box spanner with L-bar. Technical Specifications Nett Weight: 0.07Kg Length: 180mm ...

Sealey Double End Long Reach Spark Plug Box Spanner 16/21mm with L-Bar (MS158) Product Description 16/21mm Double end, traditional style, long reach spark plug box spanner with L-bar. Technical Specifications Length: 150mm Socket Size: 17/21mm

Sealey Double End Long Reach Spark Plug Box Spanner 16/18mm with L-Bar (MS157) Product Description 16/18mm Double end, traditional style, long reach spark plug box spanner with L-bar. Technical Specifications Nett Weight: 0.28Kg Length: 205mm ...

Sealey Vacuum Oil & Fluid Extractor Manual 4ltr (MS156) Product Description 4ltr Capacity. Ideal for other liquids such as water. To remove oil from an engine, simply push the probe down the dip-stick tube and pump the handle on the top of the unit...

Sealey Piston Ring Compressor 50mm Ø38-83mm (MS154) Product Description Quality construction with sprung steel wrap and friction action tension mechanism. Ideal for small engine pistons. Supplied with steel key. Technical Specifications Nett...

Sealey Motorcycle Compression & Fuel Pressure Gauge Set 3pc (MS100) Product Description Set of three gauges with connectors and adaptors for testing compression and fuel pressure on motorcycles. Gauges range from 0-300psi for compression testing,...

Sealey Motorcycle Brake Bleeder - Weighted (MS098) Product Description One-man bleeding/servicing of hydraulic brakes and clutches. The kit utilizes a small weighted non-return valve and a connector hose that attaches to the scooter or motorcycle bleed...

Sealey Motorcycle Vice Jaws Aluminium (MS090) Product Description Aluminium jaws with cutouts for 7, 10, & 15mm(5/16, 3/8 & 9/16") diameter shafts. Designed for holding steel shafts without scratching or damage, such as shocks, crankshafts or...

ƒ?› CO2 Tyre inflator kit including adaptor for Schrader type valves (used by most cars and motorcycles and some bicycles). ƒ?› 2 x 16g Canisters of CO2. ƒ?› Supplied in zipped storage pouch. ƒ?› Model No. MS087