The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

×
sidebar:
  • Sealey Vacuum Oil & Fluid Extractor Manual 1.6ltr

    Sealey Vacuum Oil & Fluid Extractor Manual 1.6ltr

    £18.13 (Inc. VAT)
    £15.11 (Ex. VAT)

    Sealey Vacuum Oil & Fluid Extractor Manual 1.6ltr (MS155) Product Description 1.6ltr Capacity. Ideal for other liquids such as water. To remove oil from an engine, simply push the probe down the dip-stick tube and pump the handle on the top of the...

  • Sealey Oil Filter Cap Wrench ??68mm x 14 Flutes

    Sealey Oil Filter Cap Wrench ??68mm x 14 Flutes

    £7.53 (Inc. VAT)
    £6.28 (Ex. VAT)

    Sealey Oil Filter Cap Wrench Ø68mm x 14 Flutes (MS045) Product Description Cap type filter wrench prevents damage to filter housing. Will withstand up to 115Nm(85lb.ft) of torque. Low profile design suitable for use in confined areas.  ...

  • Sealey Motorcycle Flywheel Puller Set 10pc

    Sealey Motorcycle Flywheel Puller Set 10pc

    £29.55 (Inc. VAT)
    £24.62 (Ex. VAT)

    Sealey Motorcycle Flywheel Puller Set 10pc (VS1822) Product Description Comprehensive set of flywheel pullers used to separate flywheel from the crankshaft taper. Features ten pullers of which five have double ends, giving increased applications...

  • Sealey Motorcycle Valve Spring Compressor

    Sealey Motorcycle Valve Spring Compressor

    £49.22 (Inc. VAT)
    £41.02 (Ex. VAT)

    Sealey Motorcycle Valve Spring Compressor (VS1814) Product Description Suitable for most motorcycle engines. Features two sizes of threaded adjusters for increased applications and five sizes of interchangeable jaws.  Supplied in carry-case.  ...

  • Sealey Motorcycle Pulley Holder - Large ??30-160mm

    Sealey Motorcycle Pulley Holder - Large ??30-160mm

    £41.47 (Inc. VAT)
    £34.56 (Ex. VAT)

    Sealey Motorcycle Pulley Holder - Large Ø30-160mm (VS1813) Product Description Suitable for flywheel and clutch pulleys on a large range of motorcycles. Adjustable strap for use on different pulley sizes up to Ø160mm. Rotate handle so foot...

  • Sealey Universal Motorcycle Pulley Holder

    Sealey Universal Motorcycle Pulley Holder

    £22.13 (Inc. VAT)
    £18.44 (Ex. VAT)

    Sealey Universal Motorcycle Pulley Holder (VS1812) Product Description Pulley holder suitable for flywheel and clutch pulleys on a large range of motorcycles. Adjusting screw allows tool to be locked at the required size. PVC dipped handle gives added...

  • Sealey Motorcycle Pulley Holder ??45-120mm

    Sealey Motorcycle Pulley Holder ??45-120mm

    £25.64 (Inc. VAT)
    £21.37 (Ex. VAT)

    Sealey Motorcycle Pulley Holder Ø45-120mm (VS1811) Product Description Suitable for flywheel and clutch pulleys on a large range of motorcycles. Adjustable strap for use on different pulley sizes. Rotate handle so foot contacts against pulley to...

  • Sealey Spark Plug Box Spanner Set 3pc Long Reach Double End

    Sealey Spark Plug Box Spanner Set 3pc Long Reach Double End

    £9.45 (Inc. VAT)
    £7.87 (Ex. VAT)

    Sealey Spark Plug Box Spanner Set 3pc Long Reach Double End (MS165) Product Description Double end, traditional style, long reach spark plug box spanners with L-bar. Length: 150mm. • Supplied in a pouch for safe storage.  Technical...

  • Sealey Vacuum Oil & Fluid Extractor Manual 4ltr

    Sealey Vacuum Oil & Fluid Extractor Manual 4ltr

    £24.19 (Inc. VAT)
    £20.16 (Ex. VAT)

    Sealey Vacuum Oil & Fluid Extractor Manual 4ltr (MS156) Product Description 4ltr Capacity. Ideal for other liquids such as water. To remove oil from an engine, simply push the probe down the dip-stick tube and pump the handle on the top of the unit...

  • Sealey Piston Ring Compressor 50mm ??38-83mm

    Sealey Piston Ring Compressor 50mm ??38-83mm

    £15.93 (Inc. VAT)
    £13.28 (Ex. VAT)

    Sealey Piston Ring Compressor 50mm Ø38-83mm (MS154) Product Description Quality construction with sprung steel wrap and friction action tension mechanism. Ideal for small engine pistons. Supplied with steel key. Technical Specifications Nett...

  • Sealey Motorcycle Compression & Fuel Pressure Gauge Set 3pc

    Sealey Motorcycle Compression & Fuel Pressure Gauge Set 3pc

    £65.84 (Inc. VAT)
    £54.87 (Ex. VAT)

    Sealey Motorcycle Compression & Fuel Pressure Gauge Set 3pc (MS100) Product Description Set of three gauges with connectors and adaptors for testing compression and fuel pressure on motorcycles. Gauges range from 0-300psi for compression testing,...

  • Sealey Motorcycle Stud Installation Tool

    Sealey Motorcycle Stud Installation Tool

    £13.27 (Inc. VAT)
    £11.06 (Ex. VAT)

    Sealey Motorcycle Stud Installation Tool (MS051) Product Description Aids fast installation of threaded studs without risk of damage to thread. Ideal for engine and exhaust studs. Operate using a 19mm spanner and a 5.5mm hex key. Thread Sizes: M6 x 1,...

  • Sealey Oil Filter Band Wrench ??65-86mm

    Sealey Oil Filter Band Wrench ??65-86mm

    £7.53 (Inc. VAT)
    £6.28 (Ex. VAT)

    Sealey Oil Filter Band Wrench Ø65-86mm (MS046) Product Description Suitable for removing and installing oil filters with diameters ranging from Ø65-86mm. 25mm Wide spring steel band with corrosion-resistant coating. PVC dipped...

  • Sealey Oil Filter Cap Wrench ??65mm x 14 Flutes

    Sealey Oil Filter Cap Wrench ??65mm x 14 Flutes

    £7.53 (Inc. VAT)
    £6.28 (Ex. VAT)

    Sealey Oil Filter Cap Wrench Ø65mm x 14 Flutes (MS044) Product Description Cap type filter wrench prevents damage to filter housing. Will withstand up to 115Nm(85lb.ft) of torque. Low profile design suitable for use in confined areas.  ...

  • Sealey Motorcycle Locking Pulley Holder

    Sealey Motorcycle Locking Pulley Holder

    £22.46 (Inc. VAT)
    £18.72 (Ex. VAT)

    Sealey Motorcycle Locking Pulley Holder (MS036) Product Description Suitable for holding flywheels, clutches and pulleys during removal and installation. 8mm Pins on one side and flat blades on the other. Features locking adjustment screw to keep tool...

  • Sealey Pilot Screw Adjusting Tool

    Sealey Pilot Screw Adjusting Tool

    £22.46 (Inc. VAT)
    £18.72 (Ex. VAT)

    Sealey Pilot Screw Adjusting Tool (MS013) Product Description 460mm Deep access tool, particularly suited to adjustment of motorcycle carburettors. 110° Angled head gives improved access to hard to reach areas. One turn of handle equals one turn of...

  • Sealey Oil Filter Claw Wrench ??43-102mm

    Sealey Oil Filter Claw Wrench ??43-102mm

    £17.08 (Inc. VAT)
    £14.23 (Ex. VAT)

    Sealey Oil Filter Claw Wrench Ø43-102mm (MS004) Product Description Chrome polished carbon steel construction with 3/8" & 1/2"Sq drive. Also suitable for use with a 21mm spanner. Claws grip filter tighter as more torque is applied. Fits a...

  • Sealey Reverse Action Spark Plug Thread Chaser 14mm

    Sealey Reverse Action Spark Plug Thread Chaser 14mm

    £22.46 (Inc. VAT)
    £18.72 (Ex. VAT)

    Sealey Reverse Action Spark Plug Thread Chaser 14mm (MS003) Product Description Specially designed to repair damaged spark plug threads on modern engines. Unique design allows the tool to be passed through the plug thread into the combustion chamber,...

  • Sealey Engine Rebuild Stand - Multi Cylinder 75kg Capacity

    Sealey Engine Rebuild Stand - Multi Cylinder 75kg Capacity

    £108.88 (Inc. VAT)
    £90.73 (Ex. VAT)

    Sealey Engine Rebuild Stand - Multi Cylinder 75kg Capacity (MES02) Product Description Engine stand suitable for lower capacity single and twin cylinder engines. The supports can swivel for accessibility to all parts of the engine. Width, height and...

  • Sealey Motorcycle Engine Stand - Single/Twin Cylinder

    Sealey Motorcycle Engine Stand - Single/Twin Cylinder

    £90.41 (Inc. VAT)
    £75.34 (Ex. VAT)

    Sealey Motorcycle Engine Stand - Single/Twin Cylinder (MES01) Product Description Suitable for lower capacity single and twin cylinder engines. Supports can rotate for accessibility to all parts of the engine. Useful integral utility/drip tray. •...

  • Sealey Motorcycle Oil Drain Pan 2.5ltr

    Sealey Motorcycle Oil Drain Pan 2.5ltr

    £12.32 (Inc. VAT)
    £10.27 (Ex. VAT)

    Sealey Motorcycle Oil Drain Pan 2.5ltr (MDRP01) Product Description Heavy-duty polypropylene construction, ideal for draining oils and antifreeze. Sloped design to easily tip contents out of pan. Thin contoured design to prevent accidental movement...

  • Sealey Carburettor Jet Tool 1.5-3mm 16pc

    Sealey Carburettor Jet Tool 1.5-3mm 16pc

    £7.29 (Inc. VAT)
    £6.08 (Ex. VAT)

    Sealey Carburettor Jet Tool 1.5-3mm 16pc (CJT02) Product Description Precision machined carburettor jet cleaning and sizing kit. 16 Sizes ranging from 1.5-3mm in 0.1mm increments. For classic cars and larger jetted motorcycles. Folding design makes it...

  • Sealey Carburettor Jet Tool 0.45-1.5mm 20pc

    Sealey Carburettor Jet Tool 0.45-1.5mm 20pc

    £13.45 (Inc. VAT)
    £11.21 (Ex. VAT)

    Sealey Carburettor Jet Tool 0.45-1.5mm 20pc (CJT01) Product Description Precision machined carburettor jet cleaning and sizing kit. 20 Sizes ranging from 0.45-1.5mm in 0.05mm increments. For classic cars and larger jetted motorcycles. Folding design...

Got any questions? We're here to help! - Email us atinfo@greasegorilla.co.uk
to top