The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

×

Steering, Hub & Suspension

Check out our steering, hubs & suspension products here

sidebar:
  • Add to Cart

    Spoke Wrench Set 9pc

    £8.94 (Inc. VAT)
    £7.45 (Ex. VAT)

    ƒ?› Specially designed spoke wrench with eight interchangeable sized heads. ƒ?› Suitable for adjusting spoke tension and correcting buckled wheels. ƒ?› Sizes: 5.4, 5.6, 5.8, 6, 6.2, 6.4, 6.6, 6.8mm. ƒ?› Model No. MS086

  • Add to Cart

    Motorcycle Coil Spring Compressor

    £47.13 (Inc. VAT)
    £39.27 (Ex. VAT)

    • Essential for the assembly and disassembly of suspension units. • Suitable for most types of classic and modern motorcycle coil springs. • Supplied with four spare plastic spring protectors in metal storage case. • Use with ratchet...

  • Add to Cart

    Motorcycle Bead Tool

    £14.49 (Inc. VAT)
    £12.07 (Ex. VAT)

    ƒ?› A must for installing tyres on spoked wheels. ƒ?› Hook slots around spoke and pushes bead down on opposite side of the tool. ƒ?› The bead is held into position while fitting the tyre with tyre levers. ƒ?› No more struggling to keep the bead down. ƒ?›...

  • Add to Cart

    Motorcycle Wheel Balancer

    £87.58 (Inc. VAT)
    £72.98 (Ex. VAT)

    ƒ?› Professional motorcycle wheel balancer. ƒ?› Suitable for most motorcycle wheels. ƒ?› Includes two cones and spindle for precise, easy alignment and balancing. ƒ?› Uses gravity to find the heavy point of a wheel and tyre. ƒ?› Maximum Cone Size: ??35mm...

  • Add to Cart

    Deluxe Tyre Lever 300mm

    £6.52 (Inc. VAT)
    £5.43 (Ex. VAT)

    ƒ?› Quality drop-forged and tempered alloy steel with flat rounded tip. ƒ?› Moulded handle enables extra grip. ƒ?› Suitable for use with motorcycle, small agricultural or leisure tyres. ƒ?› Model No. VS1818

  • sold out
    Out of stock

    Steering Bearing Press - Motorcycle

    £200.98 (Inc. VAT)
    £167.48 (Ex. VAT)

    ƒ?› Aluminium kit suitable for straight installation of bearings to headstock. ƒ?› Includes seven dies for bearing sizes ranging from 32 to 46mm. ƒ?› Bearing setting bar features seven increments. ƒ?› Comfort grip T-handle rotates separately from the...

  • Add to Cart

    Motorcycle Spindle Tool Set 5pc

    £15.35 (Inc. VAT)
    £12.79 (Ex. VAT)

    ƒ?› Prevents spindle from spinning when tightening or loosening wheel nut. ƒ?› Features 1/2"Sq drive adaptor and four hex bits for different sizes of spindle. ƒ?› Spindle Sizes: 17, 19, 22, 24mm. ƒ?› Supplied in storage case. ƒ?› Model No. VS1808

  • Add to Cart

    Rim Protector 2pc

    £6.52 (Inc. VAT)
    £5.43 (Ex. VAT)

    ƒ?› Moulded protectors with connecting cord. ƒ?› Designed to reduce the risk of damage to motorcycle wheel rims when removing or fitting tyres with tyre levers. ƒ?› Model No. VS1807

  • Add to Cart

    Tyre Bead Breaker

    £45.20 (Inc. VAT)
    £37.67 (Ex. VAT)

    ƒ?› Manual bead breaker, especially suitable for motorcycle tyres. ƒ?› Lever action with parallel linkage keeps head at the optimum angle for breaking the bead. ƒ?› Model No. TC968

  • Add to Cart

    Motorcycle & Mini Tyre Changer

    £247.96 (Inc. VAT)
    £206.63 (Ex. VAT)

    ƒ?› Manual type tyre changer suitable for a wide variety of tyres and wheels including those fitted to motorcycles, quad bikes, go-karts and golf buggies. ƒ?› Works on bearing or hub centred wheels and supplied with two centre posts. ƒ?› Min./Max. Wheel...

  • Add to Cart

    Motorcycle Fork Spring Compressor

    £82.75 (Inc. VAT)
    £68.96 (Ex. VAT)

    ƒ?› Designed to relieve fork spring tension allowing removal of the tube caps from the rod, without damaging the threads. ƒ?› Can be used with the fork in situ or on the bench. ƒ?› Fits most modern road motorcycles. ƒ?› Use with 17mm socket. ƒ?› Maximum...

  • Add to Cart

    Micro Air Compressor with Work Light 12V

    £15.16 (Inc. VAT)
    £12.63 (Ex. VAT)

    ƒ?› Air Delivery: 12.5ltr/min. ƒ?› Pressure gauge reads up to 5.5bar(80psi). ƒ?› 100mm Air hose and 2.8m power cord. ƒ?› Features a work light and integral storage for air output hose. ƒ?› 12V motor suitable for inflating tyres on motorcycles and cars...

  • sold out
    Out of stock

    Calibration Rig for MS070

    £94.06 (Inc. VAT)
    £78.38 (Ex. VAT)

    ƒ?› Used to check and adjust the alignment of the lasers on Model No. MS070 Motorcycle Wheel Laser Aligner. ƒ?› This unit will allow workshops to check and adjust in-house. ƒ?› Supplied with comprehensive instructions. ƒ?› Model No. MS070CR

  • sold out
    Out of stock

    Motorcycle Wheel Alignment Tool

    £300.61 (Inc. VAT)
    £250.51 (Ex. VAT)

    ƒ?› Fast, simple and accurate alignment of rear wheel. ƒ?› Optimises vehicle performance and set up after installation or modification of the chain, sprockets, brakes or suspension components. ƒ?› This fully portable kit is also ideal for track-day set...

  • Add to Cart

    Motorcycle Fork Seal Driver 54mm

    £34.79 (Inc. VAT)
    £28.99 (Ex. VAT)

    ƒ?› Professional seal driver for 54mm diameter forks. ƒ?› Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. ƒ?› Hardened and tempered carbon steel, finished with zinc plating for corrosion...

  • Add to Cart

    Motorcycle Fork Seal Driver 49-50mm

    £34.79 (Inc. VAT)
    £28.99 (Ex. VAT)

    ƒ?› Professional seal driver for 49-50mm diameter forks. ƒ?› Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. ƒ?› Hardened and tempered carbon steel, finished with zinc plating for...

  • Add to Cart

    Motorcycle Fork Seal Driver 48mm

    £34.79 (Inc. VAT)
    £28.99 (Ex. VAT)

    ƒ?› Professional seal driver for 48mm diameter forks. ƒ?› Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. ƒ?› Hardened and tempered carbon steel, finished with zinc plating for corrosion...

  • Add to Cart

    Motorcycle Fork Seal Driver 46-47mm

    £32.90 (Inc. VAT)
    £27.42 (Ex. VAT)

    ƒ?› Professional seal driver for 46-47mm diameter forks. ƒ?› Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. ƒ?› Hardened and tempered carbon steel, finished with zinc plating for...

  • Add to Cart

    Motorcycle Fork Seal Driver 45mm

    £32.90 (Inc. VAT)
    £27.42 (Ex. VAT)

    ƒ?› Professional seal driver for 45mm diameter forks. ƒ?› Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. ƒ?› Hardened and tempered carbon steel, finished with zinc plating for corrosion...

  • Add to Cart

    Motorcycle Fork Seal Driver 43mm

    £32.90 (Inc. VAT)
    £27.42 (Ex. VAT)

    ƒ?› Professional seal driver for 43mm diameter forks. ƒ?› Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. ƒ?› Hardened and tempered carbon steel, finished with zinc plating for corrosion...

  • Add to Cart

    Motorcycle Fork Seal Driver 41mm

    £32.90 (Inc. VAT)
    £27.42 (Ex. VAT)

    ƒ?› Professional seal driver for 41mm diameter forks. ƒ?› Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. ƒ?› Hardened and tempered carbon steel, finished with zinc plating for corrosion...

  • Add to Cart

    Motorcycle Fork Seal Driver 39mm

    £32.90 (Inc. VAT)
    £27.42 (Ex. VAT)

    ƒ?› Professional seal driver for 39mm diameter forks. ƒ?› Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. ƒ?› Hardened and tempered carbon steel, finished with zinc plating for corrosion...

  • Add to Cart

    Motorcycle Fork Seal Driver 35-36mm

    £26.61 (Inc. VAT)
    £22.17 (Ex. VAT)

    ƒ?› Professional seal driver for 35-36mm diameter forks. ƒ?› Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. ƒ?› Hardened and tempered carbon steel, finished with zinc plating for...

  • Add to Cart

    Motorcycle Fork Seal Driver 33mm

    £26.61 (Inc. VAT)
    £22.17 (Ex. VAT)

    ƒ?› Professional seal driver for 33mm diameter forks. ƒ?› Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. ƒ?› Hardened and tempered carbon steel, finished with zinc plating for corrosion...

  • Add to Cart

    Motorcycle Swingarm Bearing Tool

    £15.75 (Inc. VAT)
    £13.12 (Ex. VAT)

    ƒ?› Universal tool works on a variety of motorcycles. ƒ?› Aids the straight installation of the swingarm needle bearings. ƒ?› Supplied with 3 drivers and 3 plates. ƒ?› Bearing Sizes: 20 x 27, 21 x 27, 22 x 27, 22 x 28, 22 x 29. ƒ?› Not suitable for use...

  • Add to Cart

    Spoke Wrench

    £8.48 (Inc. VAT)
    £7.07 (Ex. VAT)

    ƒ?› Specially designed spoke wrench with six different sizes. ƒ?› Suitable for adjusting spoke tension and removing/installing new spokes. ƒ?› Model No. MS037

  • Add to Cart

    Motorcycle Fork Seal Driver Kit 9pc

    £264.15 (Inc. VAT)
    £220.12 (Ex. VAT)

    ƒ?› Professional kit to cover most diameters of forks. ƒ?› Contents: Seal Drivers; 35-36, 39, 41, 43, 45, 46-47, 48, 49-50, 54mm. ƒ?› Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. ƒ?›...

  • Add to Cart

    Fork Seal Driver

    £57.29 (Inc. VAT)
    £47.74 (Ex. VAT)

    ƒ?› Designed for easy installation of fork seals. ƒ?› Limits potential damage caused by other installation methods to the forks. ƒ?› Minimum/Maximum Fork ??: 35-55mm. ƒ?› Model No. MS016

  • Add to Cart

    Disc Brake Opening Tool

    £14.15 (Inc. VAT)
    £11.79 (Ex. VAT)

    ƒ?› Wedge shaped tool ideal for expanding the gap between brake pads to speed up pad replacement. ƒ?› Features moulded rubber handle enabling extra grip. ƒ?› Model No. MS015

  • Add to Cart

    Motorcycle Spindle Tool Set 3pc

    £10.22 (Inc. VAT)
    £8.52 (Ex. VAT)

    ƒ?› Prevents spindle from spinning when tightening or loosening wheel nut. ƒ?› Use appropriate socket on free end of tool to hold spindle. ƒ?› Six sizes to fit a variety of motorcycle makes and models. ƒ?› Model No. MS008

Got any questions? We're here to help! - Email us atinfo@greasegorilla.co.uk
to top